NeoSynth features a built in sound bank (64 MBytes/256
Mbits) that can be updated at your convenience. All instruments
can thus be updated in order to create completely new sounds from
the same keyboard.
Various sound banks are available (General MIDI standard
instruments set, Grand Piano style, Hip Hop style, Techno/House
style, RnB style and much more ...), these multiple sound banks
are available on SD Cards that can be ordered separately. These
SD Cards are then used to upgrade the on board instruments, once
upgraded the SD Card can be removed from its slot.
All available sound banks are high quality sampled
instruments, from 16 to 24 bits resolution, up to 96 kHz sampling
frequency.
NeoSynth on board powerful DSP allows up to 124 voices
of polyphony !
Built in audio effects
NeoSynth features state of the art high quality
audio effects.
Two FX engines are built in NeoSynth, one dedicated to the synthesizer
part (NeoSynth instruments), another engine dedicated to the NeoSynth
audio inputs.
Among these effects, Reverb, Delay, Parametric multi
band equalizer, Chorus, Spatializer, ... can be used simultaneously*,
all parameters of these effects are updatable in real time with
the help of a large MIDI implementation.
Multiple inputs and outputs
NeoSynth features different inputs and outputs,
it can be easily integrated in any studio setup, among these inputs
and outputs, some are digital (S/PDIF) while the others are analog,
all analog type inputs and outputs are high quality with 24 bits
Analog to Digital audio converters as well as 24 bits Digital
to Analog audio converters, all converters features about 100
to 106 dB of dynamic range, resulting in pure audio quality !
All the audio paths can be routed at your convenience,
using the patch editor software, for instance the analog and digital
inputs goes to one FX engine then they are mixed with the sounds
coming from the synthetizer part, these mixed signals can be routed
to the master or auxiliary outputs.
It is also possible to separate the routing of all
16 MIDI channels, for instance channel 10 can be routed to auxiliary
outputs while all other channels routed to the main outputs, no
limitation !
A USB port allows to attach NeoSynth MIDI input
to a Mac or PC computer, NeoSynth will be automatically detected
as a USB MIDI device since it is fully compliant with the specification
and therefore does not require any driver, NeoSynth does not act
as a computer sound card, it is not recognized as an audio device,
it is an hardware MIDI expander.
A Headphones output capable to drive down to 16
Ohms headphones is also available.
Huge MIDI implementation
Several hundreds of parameters can be updated in
real time using MIDI commands. Connect Neosynth to a MIDI controller
or a software able to send MIDI and get an in depth access to
all synthesizer parameters, routing, channels parameters, as well
as all volumes, pan, effects and so on.
The Patch editor software features the most commonly
used parameters, simply tweak one knob or slider in the software
and your instruments will sound differently.
The full MIDI implementation is available in the
user manual.
Available for UF and VX keyboards from CME
If you own a VX or UF keyboard, NeoSynth will transform
this MIDI only CME keyboard into a high quality audio keyboard,
depending on the sound bank you use, your UF or VX will become
a real Grand Piano, a Techno/House or any other style keyboard.
You will be able to completely upgrade the sounds
of your CME keyboard by simply using another SD Card containing
different sounds !